MS 261 C-M

• Features

  • Reduced-Emission Engine Technology—Caring for Nature -

    The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

  • Anti-Vibration System -

    STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.

  • Side-Access Chain Tensioner -

    The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

  • Pre-Separation Air Filtration System -

    This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.

  • Decompression Valve -

    The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.

  • STIHL M-Tronic™ -

    This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Specifications

  POWER SOURCE	Gas
  POWERHEAD WEIGHT	10.8 lbs.
  GUIDE BAR LENGTH (Recommended)	16 in.
  OILOMATIC® CHAIN	.325" RM3
  CHAIN OIL CAPACITY	9.13 oz.
  ENGINE POWER	4.0 bhp
  FUEL CAPACITY	16.9 oz.
  DISPLACEMENT	50.2 cc

  Note: STIHL recommends #3695 (23 RM3 67) OILOMATIC® saw chain and 16" 3003 000 3313 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
• Questions and Answers
• Reviews
• Warnings and Safety
  IMPORTANT SAFETY INFORMATION The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.
  
  STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

  * The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

  

  WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products.
  
  STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.

Safety products

 

 

Pro Mark™ Apron Chaps

Shop Now

 

 

Camo Glasses

Shop Now

 

 

Pro Mark™ Helmet System

Shop Now

 

 

STIHL Pro Mark™ Dynamic Protective Gloves

Shop Now